Build Your Own Vertical Strawberry Planter (Quick Version)

/in

Have a minute? Laura from Garden Answer shows us how to make vertical strawberry planters. She walks you through step by step, showing what materials to use, what potting soil and fertilizer is needed and how to hang the finished product.

This wind chime inspired planter will add life to your garden while adding an element of design to your home.

But, be sure to keep the materials in mind – even Laura almost used toxic tubing for the project.

Pro Tip: Mixing Espoma Organic Potting Mix with the Organic Bio-Tone Fertilizer allows the strawberries to get a boost in their new container while releasing nutrients slowly to ensure the edibles are being fed for a long time.

Want to watch the extended version? View it here!

Materials she used includes:

  • Galvanized Duct Work and Cap
  • Self-Tapping Sheet Metal Screws
  • Drill, Bits and 2.5″ Bi-Metal Saw
  • 1/8 inch Quick Links (x6 pieces)
  • Chain (x3 pieces)
  • 1.5 inch Ring
  • Espoma Organic Potting Mix
  • Espoma Organic Bio-Tone
  • Strawberries of your choice
  • Moss
  • Hook

Step-By-Step Instructions:

Construction

  1. Connect your galvanized tubing. There is a rivet on where they should connect – be sure to work from one end to the other to make sure it is secure.
  2. Drill a drainage hole in the bottom of the cap with a metal drill bit. Place the cap on the corrugated end and use 5 self-tapping screws to secure.
  3. Measure your planting holes. Start an inch away from the seam to keep the integrity of the tubing. Each hole should be 7.5″ away from each other. Use a pencil to mark where to drill. This will be your starting place.
  4. Drill your holes with a 2.5″ bi-metal hole saw. Ask one person to hold the tubing while the other saws. You will end up with about 15-16 holes. Safety tip: Wear long sleeves, gloves and eye protection to protect yourself from the metal.
  5. Keep your gloves on while handling the tube as it is sharp.
  6. Drill 3 holes in the top to get it ready to hang.
  7. Attach 1/8″ quick links to each of the holes. Connect your chain to the quick links. Add one more quick link to the end of each chain and each of those will go into one 1.5″ ring.

Planting:

  1. Starting from the bottom hole, add in Espoma Organic Potting Mix and Bio-Tone Fertilizer. Pro Tip: Mixing Espoma Organic Potting Mix with the Organic Bio-Tone Fertilizer allows the strawberries to get a boost in their new container while releasing nutrients slowly to ensure the edibles are being fed for a long time.
  2. Plant each hole with a strawberry and move your way up! You can also add a plant at the very top!
  3. Take little pieces of moss and add them around the strawberry plant. This will help keep the plant inside of the planter and help clean up your project.
  4. Hang your planter with a hook (Laura uses an S-hook).
  5. Slowly water in your new planter – watering too fast can make the plants fall out since their roots haven’t been established yet.

Enjoy!

See the Total Berry Guide Here

Espoma products to help you grow your best strawberries yet:

 

 

 

 

 

 

 

 

 

 

 

Where to Buy

Build Your Own Vertical Strawberry Planter (Extended Version)

/in

Need a new and updated way to grow your strawberries? Try growing them vertically!

This windchime inspired planter will add life to your garden while adding an element of design to your home. Watch as Laura from Garden Answer shows us how to make vertical strawberry planters.

Be sure to keep the materials in mind – even Laura almost used toxic tubing for the project.

Materials she used includes:

  • Galvanized Duct Work and Cap
  • Self-Tapping Sheet Metal Screws
  • Drill, Bits and 2.5″ Bi-Metal Saw
  • 1/8 inch Quick Links (x6 pieces)
  • Chain (x3 pieces)
  • 1.5 inch Ring
  • Espoma Organic Potting Mix
  • Espoma Organic Bio-Tone
  • Strawberries of your choice
  • Moss
  • Hook

Step-By-Step Instructions:

Construction

  1. Connect your galvanized tubing. There is a rivet on where they should connect – be sure to work from one end to the other to make sure it is secure.
  2. Drill a drainage hole in the bottom of the cap with a metal drill bit. Place the cap on the corrugated end and use 5 self-tapping screws to secure.
  3. Measure your planting holes. Start an inch away from the seam to keep the integrity of the tubing. Each hole should be 7.5″ away from each other. Use a pencil to mark where to drill. This will be your starting place.
  4. Drill your holes with a 2.5″ bi-metal hole saw. Ask one person to hold the tubing while the other saws. You will end up with about 15-16 holes. Safety tip: Wear long sleeves, gloves and eye protection to protect yourself from the metal.
  5. Keep your gloves on while handling the tube as it is sharp.
  6. Drill 3 holes in the top to get it ready to hang.
  7. Attach 1/8″ quick links to each of the holes. Connect your chain to the quick links. Add one more quick link to the end of each chain and each of those will go into one 1.5″ ring.

Planting:

  1. Starting from the bottom hole, add in Espoma Organic Potting Mix and Bio-Tone Fertilizer. Pro Tip: Mixing Espoma Organic Potting Mix with the Organic Bio-Tone Fertilizer allows the strawberries to get a boost in their new container while releasing nutrients slowly to ensure the edibles are being fed for a long time.
  2. Plant each hole with a strawberry and move your way up! You can also add a plant at the very top!
  3. Take little pieces of moss and add them around the strawberry plant. This will help keep the plant inside of the planter and help clean up your project.
  4. Hang your planter with a hook (Laura uses an S-hook).
  5. Slowly water in your new planter – watering too fast can make the plants fall out since their roots haven’t been established yet.

Enjoy!

 

See the Total Berry Guide Here

Espoma products to help you grow your best strawberries yet:

 

 

 

 

 

 

 

 

 

 

 

Where to Buy

DIY Easter Rabbit Garden

/in

 

Laura from Garden Answer shows you how to make a spring Easter basket! It’s the perfect decor to add to any spring festivities. In just a few minutes, you can create your own Easter rabbit garden to use as a centerpiece for your holiday dinner or decor accent.

For this project, you’ll need:

  • Spring basket
  • Removable basket liner
  • Espoma’s Organic Potting Mix
  • French lavender
  • Celosia
  • Branches
  • Spray paint
  • Reindeer moss
  • Seasonal fairy gardening elements
Mini Gnome Garden
More Fairy Garden Inspiration

How to Plan A Vegetable Garden

/in
Read more

DIY Indoor Cat Tower Garden with Instructions

/in

Even cats need a garden! Watch as Laura from Garden Answer explains how she selected the materials for and built her cat tower garden. Watch as she uses The Espoma Company’s organic seed starting mix to grow a quick batch of cat grass.

DIY Cat Tower Garden

/in

Find out how Laura from Garden Answer makes this clever indoor cat tower garden! Laura uses Espoma’s Organic Seed Starter to get her seeds off to a great start.

How to Fertilize Houseplants with Homestead Brooklyn

/in

Find out how Summer Rayne of Homestead Brooklyn cares for and fertilizes her houseplants. Summer is using Espoma’s Indoor! liquid fertilizer.

VIDEO: Caring for Your Christmas Cactus with Garden Answer

/in , , , , , ,

In this video, Laura from Garden Answer shares her top tips for nurturing everyone’s favorite holiday plant—the Christmas cactus! These beloved plants can thrive for years with proper care and attention.

Laura recommends starting with a high-quality organic potting soil, like Espoma Organic Cactus Mix, specially formulated for cacti and succulents. She also emphasizes the importance of fertilizing, suggesting Espoma Organic Cactus! Liquid Plant Food to keep your plant healthy and blooming.

Learn more about Garden Answer here:

 

 

 

 

 

 

 

 

 

Where to Buy

 

Succulent Snow Globe DIY (Full Version)

/in

Laura from Garden Answer shows you how to bring the outdoors in for the winter months. Make this easy potted plant snow globe using succulents and Espoma’s organic cactus mix. Ask kids to help make these tiny globes or make them yourself. They’re perfect for holiday decor or to give as gifts to the plant lover in your life.

 

Here are the basics:

  1. Gather your winter crafting materials, paint, potting soil, globe ornament, fairies, ribbons and succulents. Choose a small container such as a terracotta pot to serve as your base.
  2. Paint container and let dry.
  3. Fill with Espoma’s Cactus Mix
  4. Cut a large opening in clear ornament
  5. Drill a small hole in the ornament for air flow and to water succulents with an eye dropper
  6. Add a miniature toy, fairy and/or succulents
  7. Make it feel like the holidays by adding faux snow
  8. Tie a ribbon or string around the container and finish with a bow.

Looking for more inspiration? Check out our YouTube page!

 

Fall Succulent DIY

/in

Get ready for fall by creating this seasonal planter filled with low light succulents, pumpkins and owls. Laura from Garden Answer explains how to create and care for a stunning low light succulent container! Be sure to use Espoma’s Cactus Mix and Cactus! liquid fertilizer.

Want to see the full tutorial? Check out our YouTube Channel!

Espoma. A Family Tradition Since 1929.

Espoma Organic logo